Sign in

Older Change Log

Follow

Bugs Fixed in 1.1.30:

  1. Crash bug when closing the device settings popover by clicking in the graph area with a capture active
  2. High CPU usage even after data has finished processing and indexing for search
  3. Switching tabs while protocol search was disabled caused crash

     

Bugs Fixed in 1.1.29:

  1. Bug preventing user from disabling some SPI channels
  2. Crash bug when loading capture with un-used analyzers
  3. Protocol search – overhaul fixing crash bugs when switching tabs, loading and saving, closing tabs, starting captures, and more
  4. Crash bug when closing the device settings popover by clicking in the graph area with a capture active
  5. Protocol search – bug where changing tabs would over-write enabled analyzers
  6. Protocol search – bug were *.csv was not appended to file name
  7. Digital processing speed for new products significantly improved. (processing with analog still slow, will no longer slow down digital in next release)
  8. Re-enabled logic setup files
  9. Fixed crash when stopping a capture before the trigger is active with one or more analyzers active
  10. Calibration support added! Phase between digital and analog, DC accuracy, and analog frequency response now supported. See preferences dialog for calibration information about your device. It may be up to 1 week before all cal files are updated. See calibration documentation for more information
  11. Timing marker units now shown when not expanded
  12. Fixed issue where timing markers didn’t display properly when the trigger was used
  13. Fixed most common crash bug – integer sign error in analog measurement
  14. Updated HD44780 analyzer to support protocol results
  15. Fixed crash bug when changing capture settings before previous capture’s analyzers had finished

     

     Bugs Fixed in 1.1.28:

  16. Protocol bubbles and measurements MUCH easier to read.

  17. Added tool tips and shortcut info to menus
  18. Added preferences tab for calibration data 
  19. added disabled element UI support to performance selection
  20. Updated performance options to support 100, 80 60, 40, and 20 percent
  21. fixed bug where closing the trigger settings popover could crash the software
  22. fixed bug with performance option no longer valid message
  23. fixed analyzer simulation crash bug for Logic 8 and the pro devices
  24. fixed bug where changing the capture settings after capturing with an analyzer caused crashes
  25. fixed bug where double clicking a logicdata file didn't open that file
  26. fixed bug where double clicking the stop capture button crashed the software
  27. fixed bug where software would crash if non-ascii characters were in protocol search path
  28. fixed analyzer simulation crash bug for all new products
  29. Fixed issue where software crashed when running on windows with a user name that has non-ASCII characters

Bugs Fixed in 1.1.27:

  1. Bug added in 1.1.26 that caused software to crash on launch after upgrading from previous version, under common circumstances.
  2. Fixed launch error "attempting to reference memory" affecting Windows 7 x64 users.

Bugs Fixed in 1.1.26:

  1. Crash bug with sample rate performance options
  2. Fixed several display issues with voltage measurements

     

Bug Fixes in 1.1.25:

  1. Logic 16 5V support has been re-implemented!
  2. XFCE desktop where you couldn't edit timing duration
  3. Linux crash when run as root

     

Bugs Fixed in 1.1.24:

  1. Added Logic 8 support!
  2. UI issues with KDE desktop environment fixed
  3. Fixed load old file bug.
  4. Pulse counters now use more than 4 characters to output result.
  5. Capture save button now waits for capture to end.
  6. Logic 4 firmware update.
  7. Multiple issues with the Settings Popover
  8. Fixed Ubuntu 12.04 backwards compatibility issue.
  9. And many more!

Bugs Fixed in 1.1.23:

  1. Opening old save files now works
  2. Fixed bug where long captures would get corrupted
  3. Software now accurately calculates memory being used by the current capture
  4. Instantaneous measurement no longer displays when your mouse is over an analyzer bubble
  5. Fixed crash when simulating Logic 4 and then you plug in a device.
  6. Fixed crash issues with "Protocol Search" disabled
  7. And many more!

New Features in 1.1.21+:

  1. Logic 4 + 8 + Pro 8 + Pro 16 support!
  2. Drag N' Drop Channel Reordering!
  3. Channel Selection
  4. Scroll-able Channel Area
  5. Tons of new hotkeys and shortcuts!
  6. New voltage measurement tool for analog
  7. Estimated memory usage now displayed in start popover
  8. Processing progress for capture now displayed in titlebar
  9. Various Bug fixes

trello ID: 5a28d6a149bf78ea9a977aee
Have more questions? Submit a request

Comments